If the vinyl is uneven lift the pinch rollers on one side to adjust and then press down Carefully check the vinyl before cutting, since if vinyl is not well placed, serious deviation Insert the vinyl between metal rollers and pinch rollers of the machine from behind to front.ģ.

Lift the pinch-roller handles and let it away from the metal rollers.Ģ. AsĪn urgent method, a piece of leather can be used to sharpen the blade tip just like sharpeningġ. Renew the cutter timely when it is blunt in case of affecting the machine performance. As for the cutters from different factories, the using life is also very different.Ħ. Set the cutting force as little as possible only increase it when the cutter feels blunt.ĥ. As for different materials, the requirement to the cutter sharpness is different.Ĥ. The more cutting force, the shorter the using life.ģ. Please avoidĬutting off the bottom layer during the process of cutting.Ģ. More longer the out-stretching length of the cutter, more shorter the using life. The tool carrier When the tool are in appropriate position, fasten the locking screw clockwiseĬutter’s using life is limited, but you can use it as long as possible.ġ. Loosen the locking screw of the tool carrier, then put the cutter holder or plotter holder in Cover the pen with the lid then rotate them into the shellĢ. Insert a ballpoint pen and let the pen tip out of proper length.ģ. Don't touch the blade top with your finger to prevent injuryģ-2.3 Structure of Plotter holder and items of componentsįit the the ball pen into the plotter holder, the structure is asĢ. Use a flexible plastic or rubber grip to hold the blade in your hand.Carefully insert the blade into the cutter holder body and it shouldmagnetically attach.Ģ Rotate the shell of the cutter holder and make the out-stretching length of the blade tip notģ. Even very slight dirt can affect the performance ofthe cutter. Cutter ajusting screwģ-2.2 Installation and adjustment of bladeġ.Before installing the cutter, you must carefully clean the cutter holder body,the cutter and your hands.

Length of the cutter as to ensure that it doesn’t cut off theĢ.

Rotate the cutter ajusting screw to adjust the out-stretching 6 Troubleshooting-(25)Ģ Connect the signal cable to the COM1,COM2 /USB port of the computerģ Check voltage of the power source and whether it is grounded, do not connect the power utill all are in a good Installation-(4)2-1 Packing box-(4)2-2 Accessories-(4)2-3 Parts of stand-(4)2-4 Assembly of machine stand-(5)Ĭhap3 Basic Operation-(6)3-1 Installation and connection-(6)3-2 Installation of tool-(6)Ĭhap4 USB port Setting-(8)Ĭhap5 Operating Instruction-(12)5-1 Names and functions of the parts-(16)5-2 Basic operation-(15)5-3Operationg instructions-(18)5-4 Parameters Table-(23)Ĭhap.

Manual artcut 2009 pdf